How to Use the Work Sharp Pocket Knife Sharpener
By Toor Knives | Published: 2026-10-23
Category: How-to Guides
Learn how to use the Work Sharp Pocket Knife Sharpener to maintain a sharp edge on your EDC knife. Step-by-step guide for field sharpening and knife care.
Quick Answer
The Work Sharp Pocket Knife Sharpener uses built-in angle guides and a two-stage sharpening slot to restore and refine your blade edge in minutes, even in the field.
Why Choose a Manual Pocket Sharpener
Manual sharpeners like the Work Sharp Pocket Knife Sharpener give you full control over edge angle and pressure, which is especially important for high-end knives like those from Toor. They are lightweight, packable, and don't require power or water, making them ideal for camping, hiking, or everyday carry maintenance.
The trade-off is that manual sharpening takes a bit more practice than electric systems. But the angle guides on this model reduce the guesswork, so even beginners can achieve consistent results.
Common Mistakes to Avoid
Pressing too hard is the most frequent error. Let the sharpener's abrasive do the work—excessive pressure can damage the edge or wear out the sharpening surface faster.
Another mistake is skipping the fine-grit stage. The coarse slot restores a dull edge, but the fine slot is what gives you a razor-sharp finish. Always complete both steps.
Step-by-Step Sharpening Process
- Prepare the Sharpener and Knife: Place the Work Sharp Pocket Knife Sharpener on a stable, non-slip surface. Make sure your knife blade is clean and free of debris. Hold the sharpener firmly with one hand. A clean blade prevents contamination of the abrasive surface.
- Use the Coarse Slot to Restore the Edge: Insert the blade into the coarse (diamond) slot at the correct angle as guided by the sharpener. Pull the blade toward you from heel to tip with light, even pressure. Repeat 5-10 strokes per side, alternating sides each stroke. Do not saw back and forth—pull only in one direction to avoid rounding the edge.
- Switch to the Fine Slot for Refining: Move to the fine (ceramic) slot and repeat the same pulling motion. Use 5-10 strokes per side with lighter pressure than the coarse step. This removes the burr and polishes the edge to a razor finish. If the blade still feels dull after the coarse step, do more strokes before moving to fine.
- Test and Strop (Optional): Gently test the edge on a piece of paper or your thumbnail. If needed, you can run the blade across a leather strop or the back of a ceramic rod for a final polish. Wipe the blade clean before use. A sharp knife should catch on paper without tearing it.
Product Highlight
- Work Sharp Pocket™ Knife Sharpener: The Work Sharp Pocket Knife Sharpener features angle guides and innovative designs that make achieving the perfect edge simple and satisfying, and it is a light weight companion for adventures. This means you don't need to guess the sharpening angle—the built-in guides do the work for you, so you can maintain your Toor knife's edge anywhere.
Work Sharp Pocket™ Knife Sharpener
