Fit and compatibility questions
- Will these loops fit my leather sheath?
- No—at least not the Field 1.0, Field 2.0, or Field 3.0. Toor states directly that the Horizontal Carry Belt Loops do not fit those leather sheaths. If you carry one of those models, these loops are not the mounting solution.
- What are the loops actually designed to mount to?
- They are built as a lightweight horizontal mounting option, primarily for belts. Toor also notes that users have adapted them to many types of gear, so the belt is the intended starting point rather than the only possibility.
- What holds the loops together?
- The straps are made from heavy-duty rubber and use attached directional fasteners—locking button-style mechanisms that Toor describes as trusted by the US Military for airborne operations. That construction is what keeps the mount secure while still allowing release.
- Is there more than one size or variant?
- The supplied product record lists a single Standard variant and does not provide strap length, width, or belt-size ranges. If your belt is unusually wide or thin, treat fit as unconfirmed until you check the product page or contact Toor.
What the product record confirms
- Horizontal Carry Belt Loops: Heavy-duty rubber straps with attached directional locking button fasteners, described as trusted by the US Military for airborne operations. Explains the retention method you will be operating every time you put the mount on or take it off.

Horizontal Carry Belt Loops - Horizontal Carry Belt Loops: Designed as a practical lightweight horizontal mounting option, meant for belts but also used on other gear. Sets the expected use case before you commit to a horizontal setup.
- Horizontal Carry Belt Loops: The loops do not fit the Field 1.0, Field 2.0, or Field 3.0 leather sheaths. A hard compatibility stop that should be checked before ordering.
Positioning and wearing questions
- Where should a horizontal sheath sit on the belt?
- The supplied information does not prescribe a position, angle, or carry location. What it does confirm is that the loops are a horizontal mounting option, so the sheath lies along the belt line rather than hanging vertically. Choose a position that keeps the sheath clear of your hip crease and accessible to your draw hand, then test it before relying on it.
- How do I lock the directional fastener?
- When attaching the female side to the male side, make sure the opposing die of the locking tab is set in, then press down the rest of the button. That sequence is the difference between a button that seats correctly and one that only looks closed.
- How do I release it?
- Locate the locking tab on the female side—it is the small deviation in the ring of the button. Pull back the front of the button, closest to the edge of the strap, and it releases easily. Releasing before you pull the sheath away avoids fighting the mechanism.
- Can I wear these loops on something other than a belt?
- Toor has seen them used on many types of gear, so the belt is the intended use rather than a strict limit. The supplied record does not list which non-belt items are supported, so test any alternative attachment carefully before trusting it.
A quick pre-order check
Before ordering, confirm two things: your sheath is not one of the Field leather models named above, and your belt is a reasonable match for a rubber strap with button fasteners. The record does not publish strap dimensions or a belt-width range, so if either is unclear, ask Toor directly rather than guessing. The loops are inexpensive, but a mount that does not fit your sheath is still the wrong mount.


